About This Career Path
Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Industrial Technology & Skilled Trades
Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Industrial Technology & Skilled Trades Area of Interest
Welders, Cutters, Solderers, and Brazers
Average
$48,520
ANNUAL
$23.33
HOURLY
Entry Level
$33,680
ANNUAL
$16.19
HOURLY
Mid Level
$46,970
ANNUAL
$22.58
HOURLY
Expert Level
$66,370
ANNUAL
$31.91
HOURLY
Welders, Cutters, Solderers, and Brazers
Welders, Cutters, Solderers, and Brazers
Job Titles
Entry Level
JOB TITLE
Apprentice/Trainee
Mid Level
JOB TITLE
Welder
Expert Level
JOB TITLE
Senior Welder
Supporting Programs
Welders, Cutters, Solderers, and Brazers
Welders, Cutters, Solderers, and Brazers
01
Operate safety equipment and use safe work habits.
02
Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
03
Weld components in flat, vertical, or overhead positions.
04
Detect faulty operation of equipment or defective materials and notify supervisors.
05
Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
06
Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
07
Mark or tag material with proper job number, piece marks, and other identifying marks as required.
08
Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
09
Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
10
Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
Welders, Cutters, Solderers, and Brazers
Common knowledge, skills & abilities needed to get a foot in the door.
KNOWLEDGE
Production and Processing
KNOWLEDGE
Mechanical
KNOWLEDGE
Mathematics
KNOWLEDGE
English Language
KNOWLEDGE
Design
SKILL
Quality Control Analysis
SKILL
Monitoring
SKILL
Critical Thinking
SKILL
Judgment and Decision Making
SKILL
Operations Monitoring
ABILITY
Arm-Hand Steadiness
ABILITY
Near Vision
ABILITY
Finger Dexterity
ABILITY
Problem Sensitivity
ABILITY
Control Precision
Welders, Cutters, Solderers, and Brazers
Supervisor - Fabricating
441 53rd Ave, Phoenix, AZ 85043, USA
Req #20649
Tuesday, September 10, 2024
As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers — large and small — package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.
People • Customers • Trust
The Fabricating Supervisor is responsible for the oversight of machines and personnel associated with finishing activities including folding, gluing, waxing, stripping, and bundling. The Fabricating Supervisor is responsible for managing activities on the assigned shift in an efficient and safe manner.
PRINCIPLE ACCOUNTABILITIES:
Coordinate activity with the Production Manager and Shift Supervisor to plan and manage shift work orders, ensure quality requirements, and assure an even flow of work through the fabrication department to increase up-time and minimize unscheduled downtime.
Schedule work, coordinate production activities, provide direct oversight of employees, approve time records, communicate and implement company policy. Engage in employee development activities, make recommendations on employee hire, promotion, and disciplinary action.
Maintain a clean, safe and injury-free work environment by ensuring health and safety procedures are understood and executed by all employees.
Conduct employee training on all equipment, protocols, production standards, safety regulations and waste control on an ongoing basis.
Ensure completion of departmental operations within guidelines of continuous improvement policies.
Supervise efficient operation of equipment including the inspection of materials, products and equipment to detect and/or prevent malfunctions.
Analyze fabricating performance, identify opportunities, make recommendations for process and equipment improvement, establish goals and execute strategy.
Participate in production meeting and provide updates as needed.
Verify the quality of the jobs and investigate any customer complaints regarding finishing quality.
BASIC QUALIFICATIONS:
High school diploma or GED.
2+ years’ of corrugated manufacturing experience.
Ability to work flexible hours when needed.
Must be authorized to work in the U.S.
PREFERRED QUALIFICATIONS:
Some college or manufacturing training.
Previous supervisory experience with training, teambuilding, performance development, and conflict resolution.
KNOWLEDGE, SKILLS & ABILITIES:
Working knowledge of standard corrugated and packaging manufacturing concepts, practices, and procedures including continual improvement processes and safety practices.
Knowledge of the machinery, methods and procedures in the department under supervision.
Working knowledge of manufacturing systems including shop floor software.
Strong organizational skills with the ability to handle numerous details, deadlines, and requests.
Strong interpersonal skills to effectively lead and communicate with production team and management.
Ability to work in a fast paced, deadline-oriented environment, prioritize assignments, and handle multiple projects and/or requests concurrently.
Solid analytical and mechanical ability.
Strong verbal and written communication skills.
Previous work experience as a member of a team, or a strong understanding of the importance of open communication and information sharing between team members.
Allqualified applicants must apply at Careers.packagingcorp.com to be considered.
PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories.
Other details
+ Pay Type Salary
Apply Now
+ 441 53rd Ave, Phoenix, AZ 85043, USA
Full Time
A position at White Cap isn’t your ordinary job. You’ll work in an exciting and diverse environment, meet interesting people, and have a variety of career opportunities.
The White Cap family is committed to Building Trust on Every Job. We do this by being deeply knowledgeable, fully capable, and always dependable, and our associates are the driving force behind this commitment.
**Job Summary**
Manufacture customized products that meet customer specifications and prepare completed orders for shipment.
**Major Tasks, Responsibilities, and Key Accountabilities**
+ Examines specifications of the customer’s order using drawings, work orders, or blueprints to determine the characteristics of the finished item, materials to be used, and machine setup requirements.
+ Fabricates work piece as determined by work order specifications. Retrieves correct materials and performs various fabrication duties.
+ Examines work piece visually, by touch, or using tape rule, calipers, or gauges to ensure product meets desired standards.
+ Packages for shipping. Installs protective devices, such as bracing, padding, or strapping, to prevent shifting or damage to items being transported.
+ Maintains condition of work area (i.e., free of trash, product in correct location, etc.).
+ Follows company safety policies and procedures.
+ Performs other duties as assigned.
**Nature and Scope**
+ Selects correct processes from clearly prescribed rules, past practices, or instruction. Seeks advice and guidance on non-routine or problem areas from supervisor. Deviations from the norm are cleared by the supervisor.
+ Under close supervision, exercises limited latitude/independent judgment. Work typically involves detailed checks or close review of output by a senior coworker and/or supervisor.
+ None.
**Work Environment**
+ Typically located in a comfortable environment but with regular exposure to factors that may cause noticeable discomfort or a moderate risk of accident or illness, such as temperature extremes, moving machinery, loud noises, and fumes.
+ Requires intermittent periods during which continuous physical exertion is required, such as walking, standing, stooping, climbing, lifting, and maneuvering material or equipment that may be heavy (50+ pounds) or awkward.
+ Typically requires overnight travel less than 10% of the time.
**Education and Experience**
+ HS Diploma or GED strongly preferred. 0-2 years of experience in area of responsibility.
+ Ability to work outdoors and read a tape measure.
**Preferred Qualifications**
If you’re looking to play a role in building America, consider one of our open opportunities. We can’t wait to meet you.
**Functional Area** Field Operations
**Recruiter** Galbreath, Janna
**Req ID** WCJR-021206
White Cap is an Equal Opportunity Minority/Female/Individuals with Disabilities/Protected Veteran and Affirmative Action Employer. White Cap considers for employment and hires qualified candidates without regard to age, race, religion, color, sex, sexual orientation, gender, gender identity, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law.
Full Time
**Description**
**Tradesmen International** is immediately hiring motivated **Pipe Welders** for projects located in the **Chandler, AZ area** . This is a full time opportunity and the pay rate is **up to $38/hour** based on experience and skill level.If you are a Pipe Welder ready to hone your skills while mastering new ones alongside our accomplished Craft Professionals, this is your chance to advance your career!
**Job Scope:**
+ Read & interpret isometric drawings and 2d blueprints
+ Perform instrumentation bending
+ Create own weld programs and adjust said program
+ Work at elevated heights
**Requirements**
+ 4+ years of experience
**Company Details**
Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry.
Our comprehensive benefits include:
+ Tradesmen+ Rewards Program – earn points for hours worked
+ Vacation Pay
+ Health insurance
+ 401(k) profit-sharing savings plan
Find our app **, TradeGig** , in the App store to see opportunities, set notifications and click to express interest!
Tradesmen International is an EO employer - M/F/Veteran/Disability
Click here to visit Tradesmen’s full website. (http://www.tradesmeninternational.com)
**Recruiter Name**
Lakedia Thomas
**Location**
US-AZ-CHANDLER
**Posted Date** _2 hours ago_ _(9/9/2024 5:26 PM)_
**_Req ID_** _2024-353289_
**_Category_** _Welder - Flat_
**_Travel_** _No_
**_Job Board_** _IN_
**_Location_** _US-AZ-CHANDLER_
Full Time
As a Apprentice Welder / Laborer with PeopleReady Skilled Trades, you'll support Commercial Contractor throughout the Phoenix Metro Area. In this Apprentice Welder / Laborer role, you'll enjoy weekly pay, health insurance benefits and a flexible work schedule. Plus, the more hours you work, the more meaningful prizes you can unlock with Respect the Craft ,our recognition program specially designed to help tradespeople grow and thrive in their careers. Whether you're new to the trades or a seasoned pro, come take charge of your career with PeopleReady Skilled Trades. Interested? Apply today!
Note :The pay rate for this job is $21 / hour
Responsibilities:
* · Hours: M-F, 8-10 hour shifts
* 7018 F2 Welding
* Working at heights
* Nailing down panels
* Building Roof Drains
* Miscellaneous Laborer duties
Qualifications:
* 1+ Years Prior experience in the Welding field required
* Ability 7018 F2 Welding
* F2 or 3G Certification Preferred
* Previous experience working with Hand and Power tools.
* Ability to stand, bend, kneel and walk for extended periods throughout the day with or without reasonable accommodation
* Ability to lift up to 50 pounds with or without reasonable accommodation
* Ability to work on Roofs or at heights
* Position may require a drug screen
For more information, please contact on the below details –
1- Name – Eric Holt
2- Contact Number - (602) 679-3318
\#SKILLEDTRDPLUS
PeopleReady is an equal opportunity employer, and we value diversity. We do not discriminate based on race, religious affiliation, color, national origin, gender, age, marital status, sexual orientation, gender identity, veteran status, disability, or any other basis protected by law. We will get to know you and connect you with jobs that match your skills, experience and preferences. We work hard every single day to find jobs so each employee has opportunity and variety in their work.
Full Time
**Wetcast Fabricator**
**Job Details**
**Job Location**
Phoenix - Phoenix, AZ
**Salary Range**
$20.00 - $30.00 Hourly
**Job Shift**
Day
**Description**
**WHAT YOU’LL BE DOING**
The Concrete Production Worker is a key position at Jensen Precast. From start to finish you are responsible for the production of quality precast concrete products. Working in the production plant you will be on your feet moving quickly through the tasks of your day helping us meet customer needs.
Reporting to our production supervisor, you’ll primarily work with the production, quality control and yard teams.
A highlight of your day-to-day will include:
+ Performing a variety of production duties including setting up forms, installing inserts, removing excess concrete
+ Reading production drawings
+ Finishing concrete with various floats and other tools
+ Maintaining a clean and safe working environment
**WHO WE ARE LOOKING FOR**
You’re enthusiastic and motivated in a fast-paced environment. You like to work with your hands, and you aren’t afraid to get dirty. You enjoy seeing a task through to completion and take pride in your work. You don’t take shortcuts. You’re safety conscious not just for yourself, but for your team.
We’re open to individuals who aren’t just looking for their next job, they’re looking to build a career. You want an opportunity to showcase your skill set with a solid company who will invest in you. In our culture – everyone matters.
**ALL ABOUT JENSEN PRECAST**
Much like you, our founder, Don Jensen was looking for a way to support his family, so he started his Company in 1968. Since founded, we’ve been supporting communities across Nevada, California, Arizona, Washington, and Hawaii.
Jensen Precast likely has an impact on your daily life. We build culverts to take water away from your neighborhoods, underground utility boxes to hold cables, and manholes to allow workers access to the sewers deep below the roads we drive on. And that’s just a small sample of what we do at Jensen on a daily basis.
When you work at one of Jensen’s many locations, you will enjoy the close relationships and camaraderie of a small company while being part of a larger, well-established, growing company.
_We are committed to ensuring employment practices that promote equal opportunities. Please let us know if you require any reasonable accommodations during your interview process._
Full Time
Summary THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a WELDER T32, Position Description Number PDD1215000 and is part of the AZ CSMS, National Guard. Responsibilities This position is located with the Combined Support Maintenance Shop (CSMS) in Phoenix, Arizona. The primary purpose of this position is to perform a variety of welding in support of maintenance activities. THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. Requirements Conditions of Employment Qualifications Military Grades: Enlisted: E-3/PFC to E-9/SGM/CSM Warrant Officer Candidate: WOC Warrant Officer: W-1/WO1 Compatible Military Assignments: Possess or be able to obtain 91 Series MOS SPECIALIZED EXPERIENCE: Must possess 18 months experience or training demonstrating the application of a variety of electric resistance welding processes and equipment. Experience in using accepted trade methods and a variety of manual welding processes to weld all types of commonly used metals in various shapes, sizes, and thicknesses. Experience using a wider range of metal welding processes to make more difficult welds meeting close tolerance, strength, and other requirements. These welds may be in hard-to-reach places. Experience which allows the welder to devise special jigs and fixtures to hold the parts to be welded. Experience which demonstrates knowledge of several related trade procedures. Experience which enables the lay out and planning of work from blueprints, sketches, drawings, specifications, and work orders. Education You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position. Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
Full Time
**Job Posting:**
Ferguson is North America’s leading value-added distributor across residential, non-residential, new construction and repair, maintenance, and improvement (RMI) end markets. Spanning 34,000 suppliers and more than one million customers, we deliver local expertise, value-added solutions, and the industry’s most extensive portfolio of products. From infrastructure, plumbing, and appliances, to HVAC, fire protection, fabrication, and more, we make our customers’ complex projects simple, successful, and sustainable.
Ferguson is seeking a Fabrication Associate to join our team!
**Schedule: M-F 5am-1:30pm**
**Responsibilities:**
+ Setup and maintain machines in the shop for pipe fabrication
+ Accurately measure, record, and add random pipe length
+ Measure and cut pipe with band saw and/or torch, rolling and grooving single and double random lengths and threading and beveling of pipe with landis machines
+ Move loose and /or bundled pipe from various locations within the pipe yard
+ Assemble pipe orders whether in single sticks or bundles and maintain work supplies in an organized manner
+ Observe vital safety precautions for fabrications, cutting, assembling, stacking and shipping of pipe for storage and transportation
+ Operate powered industrial equipment in accordance with OSHA guidelines and Ferguson safe operating procedures
**Qualifications:**
+ Prior Fabrication experience is preferred
+ Outstanding math skills and the ability to calculate quantities of product on hand
+ Experience and training in operating machinery for the use of cutting and threading pipe according to OSHA regulations preferred
+ Ability to remain results-focused in the fast-paced customer service environment
+ The ability to thrive in an inclusive environment
Ferguson is dedicated to providing meaningful benefits programs and products to our associates and their families—geared toward benefits, wellness, financial protection, and retirement savings. Ferguson offers a competitive benefits package that includes medical, dental, vision, retirement savings with company match, paid leave (vacation, sick, personal, holiday, and parental), employee assistance programs, associate discounts, community involvement opportunities, and much more!
________________________________________________________________________________________________________
Ferguson es el distribuidor líder en América del Norte en el mercado residencial, no residencial, de nueva construcción y de reparación, mantenimiento y mejora Con una red de 34,000 proveedores y más de un millón de clientes, brindamos experiencia local, soluciones de valor agregado y el portafolio de productos más amplio de la industria. Desde infraestructura, plomería y electrodomésticos, hasta HVAC, protección contra incendios, fabricación y más, hacemos que los proyectos complejos de nuestros clientes sean simples, exitosos y sostenibles.
¡Ferguson está buscando un Asociado de Fabricación para unirse a nuestro equipo!
**Responsabilidades:**
+ Configurar y mantener las máquinas en el taller para la fabricación de tuberías.
+ Medir con precisión, registrar y agregar longitudes aleatorias de tubería.
+ Medir y cortar tubería con sierra de banda y/o soplete, enrollando y ranurando longitudes aleatorias simples y dobles y roscando y biselando tubería con máquinas Landis.
+ Mover tuberías sueltas y / o agrupadas desde varios lugares dentro del patio de tuberías.
+ Ensamblar pedidos de tuberías ya sea en piezas individuales o agrupadas y mantener los suministros de trabajo de manera organizada.
+ Observar precauciones de seguridad vitales para la fabricación, corte, ensamblaje, apilamiento y envío de tuberías para su almacenamiento y transporte.
+ Operar equipos industriales alimentados de acuerdo con las pautas de OSHA y los procedimientos operativos seguros de Ferguson.
**Requisitos:**
+ Se prefiere experiencia previa en fabricación.
+ Excelentes habilidades matemáticas y capacidad para calcular las cantidades de productos disponibles.
+ Se prefiere experiencia y capacitación en la operación de maquinaria para el corte y roscado de tuberías según las regulaciones de OSHA.
+ Capacidad para mantenerse enfocado en los resultados en un entorno de servicio al cliente acelerado.
+ La capacidad para prosperar en un entorno inclusivo.
Se requiere prueba de drogas y verificación de antecedentes a la contratación *
Tenga en cuenta que esta posición requiere que los candidatos tengan un buen nivel de inglés. El formulario de aplicación y posibles entrevistas serán llevadas en inglés.
Ferguson se dedica a proporcionar programas y productos para el beneficio de nuestros asociados y sus familias, enfocados en beneficios, bienestar, protección financiera y ahorros para la jubilación. Ferguson ofrece un paquete de beneficios competitivo que incluye seguro médico, dental, visión, ahorros para la jubilación con aporte de la empresa, licencia remunerada (vacaciones, enfermedad, personal, días festivos y de paternidad/maternidad), programas de asistencia al empleado, descuentos para asociados, oportunidades de participación comunitaria ¡y mucho más!
-
**Pay Range:**
-
$15.61 - $23.41
-
**_Estimated Ranges displayed are Monthly for Salaried roles_** **OR** **_Hourly for all other roles._**
-
This role is Bonus or Incentive Plan eligible.
-
_The Company is an equal opportunity employer as well as a government contractor that shall abide by the requirements of 41 CFR 60-300.5(a), which prohibits discrimination against qualified protected Veterans and the requirements of 41 CFR 60-741.5(A), which prohibits discrimination against qualified individuals on the basis of disability._
_Ferguson Enterprises, LLC. is an equal employment employer_ _F/M/Disability/Vet/Sexual_ _Orientation/Gender_ _Identity._
Equal Employment Opportunity and Reasonable Accommodation Information (https://www.ferguson.com/content/careers/reasonable-accommodation)
Full Time
**Requisition ID: 162328**
**Position Summary**
Responsible for the layout, installation, assembly and steel erection components in accordance with blueprint plans, specifications, codes, and industry standards.
**Experience Level**
Skilled
**Primary Responsibilities and Duties**
• Reads specifications or blueprints to determine the locations, quantities, or sizes of material required.
• Fabricates metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
• Unloads and positions prefabricated steel units for hoisting; hoists steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and position structural steel members.
• Verifies vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
• Cuts, bends, or welds steel pieces, using metal shears, torches, or welding equipment.
• Forces structural steel members into final positions, using turnbuckles, crowbars, jacks, or hand tools.
• Pulls, pushes or pries structural steel members into approximate positions for bolting into place.
• Bolts aligned structural-steel members in position for permanent riveting, bolting, or welding into place.
• Assemble hoisting equipment or riggings, such as cables, pulleys, or hooks, to move heavy equipment or materials.
• Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.
• Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed.
**Qualifications**
• May require a high school diploma or its equivalent with previous years of experience in the field or in a related area.
• Must possess strong working knowledge skills and abilities for position.
• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.
• Proficient in the safe and efficient use of electrical, hand tools, power tools and layout tools as well as measurement tools
**Requirements**
+ The person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl
• Constantly works in a construction environment and will be exposed to changing outdoor
weather conditions
• Work irregular hours, weekends, overtime and holidays as required
• May be required to use ladders/mechanical platforms/manlifts/scaffold to access
required equipment/work areas (may exceed 200 feet), so must be able to climb and
maintain balance on formwork, steel formwork, stairs, ladders and scaffolds
• Move and work in and around confined and cluttered places, and uneven surfaces
• Must be able to complete tasks in a noisy and dusty environment
• May be required/able to move items weighing up to 50 pounds across
construction/industrial site
• Must have required tools
• Observe and comply with all safety and project rules, perform other duties as required
• Ability to pass pre-access drug and alcohol testing
_We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law._
Company: TIC_Craft
Full Time
**Requisition ID: 162329**
**Position Summary**
Assist skilled craftsperson(s) by performing supportive duties as directed and will work under immediate supervision. The level and degree of job responsibilities and requirements vary depending on months of experience and assigned job step.
**Experience Level**
Entry
**Primary Responsibilities and Duties**
• Learn to read specifications or blueprints to determine the locations, quantities, or sizes of material required.
• Assist skilled craftsmanf to fabricate metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
• Assist with unloading and positioning prefabricated steel units for hoisting; hoists steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and position structural steel members.
• Learn to verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
• Cuts, bends, or welds steel pieces, using metal shears, torches, or welding equipment.
• Assemble hoisting equipment or riggings, such as cables, pulleys, or hooks, to move heavy equipment or materials.
**Qualifications**
• May require a high school diploma or its equivalent with previous years of experience in the field or in a related area.
• Must possess knowledge skills and abilities for position
• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision
• Field experience in chosen craft discipline
• Knowledge of the safe and efficient use of hand tools, power tools and layout tools.
**Requirements**
+ The person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl
• Constantly works in a construction environment and will be exposed to changing outdoor
weather conditions
• Work irregular hours, weekends, overtime and holidays as required
• May be required to use ladders/mechanical platforms/manlifts/scaffold to access
required equipment/work areas (may exceed 200 feet), so must be able to climb and
maintain balance on formwork, steel formwork, stairs, ladders and scaffolds
• Move and work in and around confined and cluttered places, and uneven surfaces
• Must be able to complete tasks in a noisy and dusty environment
• May be required/able to move items weighing up to 50 pounds across
construction/industrial site
• Must have required tools
• Observe and comply with all safety and project rules, perform other duties as required
• Ability to pass pre-access drug and alcohol testing
_We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law._
Company: TIC_Craft
Full Time
As a Apprentice Welder / Carpenter with PeopleReady Skilled Trades, you'll support Commercial Contractor throughout the Phoenix Metro Area. In this Apprentice Welder / Carpenter role, you'll enjoy weekly pay, health insurance benefits and a flexible work schedule. Plus, the more hours you work, the more meaningful prizes you can unlock with Respect the Craft ,our recognition program specially designed to help tradespeople grow and thrive in their careers. Whether you're new to the trades or a seasoned pro, come take charge of your career with PeopleReady Skilled Trades. Interested? Apply today!
Note: The pay rate for this job is $24 - $28 / hour
Job Responsibilities:
* Hours: M-F, 8-10 hour shifts
* MIG and TIG Welding
* Working at heights
* Nailing down panels
* Building Roof Drains
* Miscellaneous welding / carpentry duties
Qualifications & Experience:
* 1+ Years Prior experience in the Welding field required
* Ability F2 Flat Horizontal Welding ·
* F2 or 3G Certification Preferred ·
* Previous experience working with Hand and Power tools. ·
* Ability to stand, bend, kneel and walk for extended periods throughout the day with or without reasonable accommodation ·
* Ability to lift up to 50 pounds with or without reasonable accommodation ·
* Ability to work on Roofs or at heights ·
* Position may require a drug screen
For more information, please contact on the below details –
1- Name – Eric Holt
2- Contact Number - (602) 679-3318
\#SKILLEDTRDPLUS
PeopleReady is an equal opportunity employer, and we value diversity. We do not discriminate based on race, religious affiliation, color, national origin, gender, age, marital status, sexual orientation, gender identity, veteran status, disability, or any other basis protected by law. We will get to know you and connect you with jobs that match your skills, experience and preferences. We work hard every single day to find jobs so each employee has opportunity and variety in their work.
Full Time
Industrial Technology & Skilled Trades
Not sure where to begin?
Career Exploration