Electricians

**Requisition ID: 172402**

**Position Summary**

Plan, lay-out, install, test and repair wiring, electrical fixtures, apparatus, motors, equipment and control systems in accordance with all applicable plans, specifications, codes and industry standards.

**Experience Level**

Skilled

**Primary Responsibilities and Duties**

• Interprets drawings, sketches, software, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems

• Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations

• Installs control and distribution apparatus’ and fastens in place

• Test and start up systems and continuity of circuit to insure electrical compatibility and safety of components

• Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement

• May be required to pull wire through conduit; connect wiring to lighting fixtures and power equipment

• Work with high and low voltage systems

• Disassembles and repairs defective electrical equipment or systems

• Operate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical tools

• Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.

• Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed.

**Qualifications**

• Must possess strong working knowledge skills and abilities for position.

• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.

• Proficient in the safe and efficient use of electrical, hand tools, power tools and layout tools as well as measurement tools

**Requirements**

• The person in this position needs to constantly move about a construction/industrial site,

so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl

• Constantly works in a construction environment and will be exposed to changing outdoor

weather conditions

• Work irregular hours, weekends, overtime and holidays as required

• May be required to use ladders/mechanical platforms/manlifts/scaffold to access

required equipment/work areas (may exceed 200 feet), so must be able to climb and

maintain balance on formwork, steel formwork, stairs, ladders and scaffolds

• Move and work in and around confined and cluttered places, and uneven surfaces

• Must be able to complete tasks in a noisy and dusty environment

• May be required/able to move items weighing up to 50 pounds across

construction/industrial site

• Must have required tools

• May require US drivers license

• Observe and comply with all safety and project rules, perform other duties as required

• Ability to pass pre-access drug and alcohol testing, fit for duty medical and background check

Equal Opportunity Employer, including disability and protected veteran status.

Company: TIC_Craft

**Requisition ID: 172403**

**Position Summary**

Plan, lay-out, install, test and repair wiring, electrical fixtures, apparatus, motors, equipment and control systems in accordance with all applicable plans, specifications, codes and industry standards.

**Experience Level**

Skilled

**Primary Responsibilities and Duties**

• Interprets drawings, sketches, software, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems

• Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations

• Installs control and distribution apparatus’ and fastens in place

• Test and start up systems and continuity of circuit to insure electrical compatibility and safety of components

• Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement

• May be required to pull wire through conduit; connect wiring to lighting fixtures and power equipment

• Work with high and low voltage systems

• Disassembles and repairs defective electrical equipment or systems

• Operate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical tools

• Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.

• Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed.

**Qualifications**

• Must possess strong working knowledge skills and abilities for position.

• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.

• Proficient in the safe and efficient use of electrical, hand tools, power tools and layout tools as well as measurement tools

**Requirements**

• The person in this position needs to constantly move about a construction/industrial site,

so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl

• Constantly works in a construction environment and will be exposed to changing outdoor

weather conditions

• Work irregular hours, weekends, overtime and holidays as required

• May be required to use ladders/mechanical platforms/manlifts/scaffold to access

required equipment/work areas (may exceed 200 feet), so must be able to climb and

maintain balance on formwork, steel formwork, stairs, ladders and scaffolds

• Move and work in and around confined and cluttered places, and uneven surfaces

• Must be able to complete tasks in a noisy and dusty environment

• May be required/able to move items weighing up to 50 pounds across

construction/industrial site

• Must have required tools

• May require US drivers license

• Observe and comply with all safety and project rules, perform other duties as required

• Ability to pass pre-access drug and alcohol testing, fit for duty medical and background check

Equal Opportunity Employer, including disability and protected veteran status.

Company: TIC_Craft

**Requisition ID: 172400**

**Position Summary**

Plan, lay-out, install, test and repair wiring, electrical fixtures, apparatus, motors, equipment and control systems in accordance with all applicable plans, specifications, codes and industry standards.

**Experience Level**

Skilled

**Primary Responsibilities and Duties**

• Interprets drawings, sketches, software, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems

• Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations

• Installs control and distribution apparatus’ and fastens in place

• Test and start up systems and continuity of circuit to insure electrical compatibility and safety of components

• Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement

• May be required to pull wire through conduit; connect wiring to lighting fixtures and power equipment

• Work with high and low voltage systems

• Disassembles and repairs defective electrical equipment or systems

• Operate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical tools

• Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.

• Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed.

**Qualifications**

• Must possess strong working knowledge skills and abilities for position.

• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.

• Proficient in the safe and efficient use of electrical, hand tools, power tools and layout tools as well as measurement tools

**Requirements**

• The person in this position needs to constantly move about a construction/industrial site,

so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl

• Constantly works in a construction environment and will be exposed to changing outdoor

weather conditions

• Work irregular hours, weekends, overtime and holidays as required

• May be required to use ladders/mechanical platforms/manlifts/scaffold to access

required equipment/work areas (may exceed 200 feet), so must be able to climb and

maintain balance on formwork, steel formwork, stairs, ladders and scaffolds

• Move and work in and around confined and cluttered places, and uneven surfaces

• Must be able to complete tasks in a noisy and dusty environment

• May be required/able to move items weighing up to 50 pounds across

construction/industrial site

• Must have required tools

• May require US drivers license

• Observe and comply with all safety and project rules, perform other duties as required

• Ability to pass pre-access drug and alcohol testing, fit for duty medical and background check

Equal Opportunity Employer, including disability and protected veteran status.

Company: TIC_Craft

Certified Diagnostic Electrician- Line Crew

Requisition ID: 139502

Location:

Safford, AZ, US, 85548

Category: Maintenance

Share this Job

Why You Should Apply For This Job:

_At Freeport-McMoRan, we are committed to providing an employment package that recognizes excellence, encourages safe production and a culture supported by our core values. Here, you’ll find a collaborative environment where safety is a top priority, all opinions are valued, and people are empowered to grow in their career._ **_Apply Today! _**

**Where You Will Work **

In operation since 2007, Safford operations is a zero-discharge facility and one of the most sustainable mines in the United States. The operation’s commitment to utilizing advanced technologies and sustainable practices strongly emphasizes safety and environmental stewardship. Located in southeastern Arizona, close to more than 4 million acres of national forest, employees and their families can connect with the great outdoors while fishing, rafting, hiking and more. Several educational institutions also are nearby, including a Northern Arizona University satellite campus, Eastern Arizona College, and the Gila Institute for Technology.

**Description**

Highly skilled electrical and/or instrument technician who applies a broad level of process and electrical knowledge to maximize and, where possible, improve the efficiency of the overall production process. These employees have met the qualifications of the company certification process. These workers mentor and train other workers.

+ Safe completion of routine and non-routine repairs and construction

+ Perform preventive maintenance, installation, repair and troubleshooting of industrial electrical and/or instrumentation equipment (i.e. substations, power distribution systems, switchgear motors, motor controls, systems and components, process controls, instrumentation and pneumatic equipment)

+ Provide leadership in areas such as safety, environmental, mentoring of new employees and apprentices, cost control, project management, KPI tracking and measurement, and proactive maintenance management processes

+ Perform other duties as assigned

**Qualifications**

**Minimum Qualifications**

+ Five (5) years ofexperience in industrial electrical and/or instrumentation repair and maintenance

+ Qualified under the company certification process

+ Valid state driver's license

+ Must have completed academic and practical competencies required (this includes Line of Progression requirements for internal employees where LOP Exists) and have experience demonstrating the required aptitude. The selected candidate shall demonstrate the ability to apply knowledge and skills while also passing a written assessment where required. This exam is based on skills/abilities and/or academic knowledge; as well as safety.

**Preferred**

+ High School diploma or GED

+ Experience with VFDs, PLC, HMI, and/or SCADA Control Systems

+ Experience working with low and medium voltages

+ Experience with AC and/or DC controls

+ Experience with instrumentation devices

+ Experience with diagnostic electrical test equipment

+ Experience with HVAC equipment

**Criteria/Conditions**

+ Ability to understand and apply verbal and written work and safety-related instructions and procedures given in English

+ Ability to communicate in English with respect to job assignments, job procedures, and applicable safety standards

+ Must be able to work in a potentially stressful environment

+ Work is performed in a mine or manufacturing plant which may include exposure to extremes in temperature and humidity, moving mechanical parts, risk of electrical shock, toxic chemicals, explosives, fumes or airborne particles

+ While performing the duties of this job, the employee is required to stand, sit, demonstrate manual dexterity, climb stairs and ladders, work on elevated platforms, talk, hear and see

+ Occasionally may be required to lift moderately heavy to heavy objects up to fifty (50) pounds during the course of the workday

+ Personal protective equipment is required on a regular basis, including hard hat, hearing protection, safety glasses, safety foot wear, and as needed, respirator, rubber steel-toe boots, protective clothing, gloves and other protective equipment as required

+ In order to receive full consideration for an interview, candidates must include all experience on their resume that indicates they have successfully met all the minimum requirements listed in this posting

+ Must complete the pre-employment color perception as well as electrical/instrumentation assessment

+ Working weekends, holidays, rotating shifts and both scheduled and unscheduled overtime as business needs dictate

+ Freeport-McMoRan promotes a drug/alcohol free work environment through the use of mandatory pre-employment drug testing and on-going random drug testing

**What We Offer You**

The estimated pay range for this role is currently **$36.00 - $48.50/hour** . This range reflects base salary only and does not include bonus payments, benefits or retirement contributions. Actual base pay is determined by experience, qualifications, skills and other job-related factors. This role is eligible for additional discretionary and incentive payment considerations based on company and individual performance. More details will be shared during the hiring process. Click here to view a sample of Total Rewards Estimate for this role.

+ Affordable medical, dental and vision benefits

+ Company-paid life and disability insurance

+ 401(k) plan with employer contribution/match

+ Paid time off, paid sick time, holiday pay, parental leave

+ Tuition assistance

+ Employee Assistance Program

+ Discounted insurance plans for pet, auto, home and vehicle

+ Internal progression opportunities

+ Learn more (https://jobs.fcx.com/content/Benefits/?locale=en\_US) about our competitive and comprehensive benefits package!

** What We Require **

+ Candidates may be required to pass a medical exam.

+ Candidates must pass all required training and/or testing.

+ Employees may be required to work a non-standard schedule, which may include shift work (other than day shift) at a 24/7, 365-day operation.

+ Freeport-McMoRan promotes a drug/alcohol-free work environment using mandatory pre-employment drug testing and on-going drug and alcohol testing, as allowed by applicable laws.

**Equal Opportunity Employer **

_Please be advised that Freeport-McMoRan will never request payment for job-related expenses from applicants. If you receive any suspicious emails, please disregard them, and report the incident to_ _HRSC@fmi.com_ _._

JOIN OUR TEAM! POSITION: Journeyman Electrician LOCATION: Phoenix Metro Area ! PeopleReady Skilled Trades (PRST) is gearing up and hiring Journeyman Electricians to get ready for multiple upcoming projects. As an experienced Electrician with PRST, you'll support commercial and residential projects throughout Phoenix Metro Area. In this role, you'll enjoy weekly pay and health insurance benefits. Plus, unlock meaningful prizes with our Respect the Craft recognition program designed to help tradespeople grow and thrive. PRST is your source for continuous job opportunities within the trades. Our job is to connect you with reliable, safe work that gives you the ultimate flexibility to build your own path. Whether you're new to the trades or a seasoned pro, take charge of your career with PRST. Interested? Apply today!

_Note: The hourly rate for this position is $28 - $37 / hour. This range is a good-faith estimate based on factors such as relevant skills, experience, education, training, geographic location and other considerations permitted by law. An employee's pay history will not be a contributing factor where prohibited by local law. Applications are accepted on an ongoing basis unless a deadline is otherwise stated._

**Benefits:**

In addition to monetary compensation, we offer a competitive benefits package which includes 401k, medical, dental, vision, life and AD&D, short-term disability, critical illness, accident and hospital indemnity. More information can be found by visiting Associate Benefits Guide (https://online.flippingbook.com/view/80068721/) . Other compensations include referral bonuses opportunities. Learn more at https://skilled.peopleready.com/referral/ .

**Responsibilities:**

+ Measuring, cutting, and bending wire and conduit using measuring instruments and hand tools

+ Maintaining tools, vehicles, and equipment and keeping parts and supplies in order

+ Performing duties related to the installation, maintenance, and repair of a wide variety of electrical systems and equipment

+ Following state and local building regulations based on the National Electrical Code

+ Install, maintain, and repair electrical systems and equipment including wiring, transformers, switchgear, motors, and other electrical components

+ Bend and install various types of conduit, including EMT, rigid, and PVC.

+ Troubleshoot and diagnose electrical problems and recommend solutions

+ Read and interpret blueprints, schematics, and other technical diagrams

+ Install electrical systems according to industry standards and regulations

+ Conduct regular inspections of electrical systems to ensure they are following safety regulations and standards

+ Coordinate with other trades and contractors on construction sites to ensure timely completion of projects

+ Maintain accurate records of electrical work performed

**Qualifications:**

+ Tools of the trade Minimum 4 years' experience in electrical field

+ Must pass bending test

+ Reliable transportation

TrueBlue, Inc. and its brands welcome and encourage applications from candidates with disabilities. Accommodations are available on request for candidates taking part in the selection process. If you require disability-related accommodation during the recruitment process, please contact your Recruiter or Employee Relations at HR-Advice@trueblue.com or 1.800.610.8920. TrueBlue, Inc. and its brands will consult with all applicants who request disability-related accommodation during the recruitment process to ensure that the accommodation provided takes into account the applicant's individual accessibility needs.

For more information, please contact on the below details -

1- Name - Elizabeth Albuja

2- Contact Number - (480) 431-0204

\#SKILLEDTRD

PeopleReady is an equal opportunity employer, and we value diversity. We do not discriminate based on race, religious affiliation, color, national origin, gender, age, marital status, sexual orientation, gender identity, veteran status, disability, or any other basis protected by law. We will get to know you and connect you with jobs that match your skills, experience and preferences. We work hard every single day to find jobs so each employee has opportunity and variety in their work.

PeopleReady (PRST) is hiring for upcoming projects. As Journeyman Commercial Electrician with PRST, you?ll support electrical contractors throughout the Tucson Area. In this role, you'll enjoy weekly pay, health insurance benefits and a flexible work schedule.

_Note: The hourly rate for this position is $28 - $30 / hour. This range is a good-faith estimate based on factors such as relevant skills, experience, education, training, geographic location and other considerations permitted by law. An employee's pay history will not be a contributing factor where prohibited by local law. Applications are accepted on an ongoing basis unless a deadline is otherwise stated._

**Benefits:**

In addition to monetary compensation, we offer a competitive benefits package which includes 401k, medical, dental, vision, life and AD&D, short-term disability, critical illness, accident and hospital indemnity. More information can be found by visiting Associate Benefits Guide (https://online.flippingbook.com/view/80068721/) . Other compensations include referral bonuses opportunities. Learn more at https://skilled.peopleready.com/referral/ .

**Responsibilities:**

+ Measuring, cutting, and bending wire and conduit using measuring instruments and hand tools

+ Performing duties related to the installation, maintenance, and repair of a wide variety of electrical systems and equipment

+ Following state and local building regulations based on the National Electrical Code

+ Install, maintain, and repair electrical systems and equipment including wiring, transformers, switchgear, motors, and other electrical components.

+ Bend and install various types of conduit, including EMT, Rigid, and PVC.

+ Troubleshoot and diagnose electrical problems and recommend solutions.

+ Read and interpret blueprints, schematics, and other technical diagrams.

+ Install electrical systems according to industry standards and regulations.

+ Conduct regular inspections of electrical systems to ensure they are following safety regulations and standards.

+ Coordinate with other trades and contractors on construction sites to ensure timely completion of projects

+ Maintain accurate records of electrical work performed.

**Qualifications:**

+ Must have at least 5 Years Commercial Electrical experience

+ Must have tools of the trade

+ Must have verifiable work experience

+ Must have reliable transportation

TrueBlue, Inc. and its brands welcome and encourage applications from candidates with disabilities. Accommodations are available on request for candidates taking part in the selection process. If you require disability-related accommodation during the recruitment process, please contact your Recruiter or Employee Relations at HR-Advice@trueblue.com or 1.800.610.8920. TrueBlue, Inc. and its brands will consult with all applicants who request disability-related accommodation during the recruitment process to ensure that the accommodation provided takes into account the applicant's individual accessibility needs.

\#SKILLEDTRDPRI

PeopleReady is an equal opportunity employer, and we value diversity. We do not discriminate based on race, religious affiliation, color, national origin, gender, age, marital status, sexual orientation, gender identity, veteran status, disability, or any other basis protected by law. We will get to know you and connect you with jobs that match your skills, experience and preferences. We work hard every single day to find jobs so each employee has opportunity and variety in their work.

**Journeyman Lineman**

Company **UniSource Energy Electric**

Location **Nogales, AZ**

Requisition ID **5865**

**About Us**

UNS Energy Corporation (http://www.uns.com) , headquartered in Tucson, Arizona, is a subsidiary ofFortis Inc. (https://www.fortisinc.com) , the largest investor-owned electric and gas distribution utility in Canada. Our public utility subsidiaries, Tucson Electric Power Company, UNS Electric, Inc. and UNS Gas, Inc., power our economy by providing electric and gas service to nearly 700,000 customers in Arizona.

We embrace a spirit of giving, dedicated to improving quality of life in the communities we have served for generations, and in TEP’s case, since the 1890s. We’re building a cleaner, greener grid, with more wind and solar power than ever before, while maintaining safe, reliable, and affordable service.

**Your Employer of Choice**

Our culture is rooted inshared core values (https://www.tep.com/careers/#values) that define how we work and who we are. Our team of innovative professionals bring their authentic selves to work each day to power our vision and make a difference.

We create opportunities for employees to thrive through:

+ **Continual growth:** In an industry changing faster than ever before, our commitment to professional growth and leadership development means we never stop challenging ourselves to explore new possibilities.

+ **Active Engagement:** We support a collaborative environment, with peer-to-peer learning and employee-driven groups that foster an inclusive culture.

+ **Total compensation:** UNS Energy Corporation also offers a competitive compensation and benefits package that includes a 401k plan with a generous company match and additional non-discretionary employer contribution for eligible employees, affordable individual and family health insurance plans, tuition assistance, life insurance, long-term disability insurance and much more.

Hear from some of our employees,here (https://youtu.be/hpknvJPLuoc) andhere (https://youtu.be/7BECywu-Re4) .

**Job Description - Journeyman Lineman**

Position Title:

Journeyman Lineman

Business Reporting Unit:

UNSE Santa Cruz Elect Const

FLSA Status:

Non-Exempt

Level:

Non-Manager

EEOC Category:

Craft Workers

EEOC Job Group

Journeyman

Does this position involve transmission and/or marketing functions? - TRM, MKT, or N/A

N/A

CIP status -Cyber, Physical, Both or Neither (Select one)

Neither

Job Code

NG019

Safety Sensitive:

Yes

Last Business Unit Review

9/12/19

Position Description

An employee who is a Journeyman and who performs all phases of construction, operation and maintenance of transmission and distribution overhead and underground lines in accordance with Company standards and other Company and/or governmental rules and regulations.

Position-Related Responsibilities

¨ Guiding the work of Apprentices and Helpers working with him/her.

¨ Assembly of wood pole electrical lines and components.

¨ Installation of underground conduit systems.

¨ Installation of URD systems.

¨ Connection of all types of transformers and other equipment used on overhead and underground lines.

¨ Drive and operate all equipment to accomplish daily work and, and possess a CDL Operators license.

¨ Perform switching and install “hold tags” on the electrical systems, as required.

¨ Maintain a high level of awareness and responsibility for environmental considerations that impact them, their jobs and the Company to the level of their knowledge, training and experience.

¨ Perform emergency service restoration

¨ Perform assigned work in a safe and efficient manner in accordance with Company practices and procedures.

¨ Subject to on-call responsibilities which include the requirement to respond in a timely manner.

¨ Must reside in UES Santa Cruz service territory.

¨ This position may provide services to affiliates of the Company subject to the UNS Energy Code of Conduct and the related Policies and Procedures.

Knowledge, Skills and Abilities

¨ Knowledge of Company policies and procedures

¨ Thorough understanding of utility distribution and transmission systems, both overhead and underground.

¨ Knowledgeable about electric utility services, products, service requirements and construction standards.

¨ Knowledgeable about codes, ordinances, franchise agreements and Blue Stake laws.

¨ This employee will be qualified to climb poles and operate aerial lifts and other construction equipment, and will be expected to work on energized equipment at any voltage level in conformance with training and safe work practices.

¨ Completion of an accredited Lineman/Cable Apprenticeship Program or equivalent

¨ Uses technical knowledge of UES’s distribution system and policies to creatively solve problems dealing with both internal and external customers.

¨ Ability to lead and work on a team effectively.

¨ Demonstrate leadership and planning skills.

¨ Ability to communicate effectively, both orally and written.

¨ Ability to combine input from a variety of sources and make sound business decisions based on this information.

¨ Read blue prints, maps, drawings, and work request packages.

All employees are expected and required to adhere to the Company Code of Ethics and Principles of Conduct.

Salary Zone:56.37

Last HR Review Date:4-24-19

**Pay Rate:** 56.37

**All job offers are contingent on successful completion of a pre-employment drug screen and background check.**

California Job Applicants -click here (https://www.tep.com/california-job-applicant-and-independent-contractor-privacy-notice/) to see our Job Applicant Privacy Notice.

**Journeyman Lineman**

Company **UniSource Energy Electric**

Location **Kingman, AZ**

Requisition ID **5969**

**About Us**

UNS Energy Corporation (http://www.uns.com) , headquartered in Tucson, Arizona, is a subsidiary ofFortis Inc. (https://www.fortisinc.com) , the largest investor-owned electric and gas distribution utility in Canada. Our public utility subsidiaries, Tucson Electric Power Company, UNS Electric, Inc. and UNS Gas, Inc., power our economy by providing electric and gas service to nearly 700,000 customers in Arizona.

We embrace a spirit of giving, dedicated to improving quality of life in the communities we have served for generations, and in TEP’s case, since the 1890s. We’re building a cleaner, greener grid, with more wind and solar power than ever before, while maintaining safe, reliable, and affordable service.

**Your Employer of Choice**

Our culture is rooted inshared core values (https://www.tep.com/careers/#values) that define how we work and who we are. Our team of innovative professionals bring their authentic selves to work each day to power our vision and make a difference.

We create opportunities for employees to thrive through:

+ **Continual growth:** In an industry changing faster than ever before, our commitment to professional growth and leadership development means we never stop challenging ourselves to explore new possibilities.

+ **Active Engagement:** We support a collaborative environment, with peer-to-peer learning and employee-driven groups that foster an inclusive culture.

+ **Total compensation:** UNS Energy Corporation also offers a competitive compensation and benefits package that includes a 401k plan with a generous company match and additional non-discretionary employer contribution for eligible employees, affordable individual and family health insurance plans, tuition assistance, life insurance, long-term disability insurance and much more.

Hear from some of our employees,here (https://youtu.be/hpknvJPLuoc) andhere (https://youtu.be/7BECywu-Re4) .

**Job Description - Journeyman Lineman**

**Journeyman Lineman opportunities in Northwest Arizona**

**UniSource Energy Services is seeking a Journeyman Lineman for its** **Kingman, AZ** **location.**

+ **$56.28/hr**

+ **Double time for all overtime**

+ **Relocation Assistance available**

+ **Full benefit package – including a 401(k) with a 6% non-discretionary company contribution and a 4.5% dollar for dollar matching contribution**

If you’re looking for a career with a company with a focus on working in a manner that prevents injury, providing safe, reliable service to its customers, and making a difference in the communities it serves, then you've come to the right place.

UniSource Energy Services (UES) provides safe, reliable electric service to more than 91,000 customers in Mohave and Santa Cruz counties. In Mohave County, we provide service to Kingman, located in the high desert central portion of the county, and Lake Havasu City, situated in the low desert along the Colorado River. We're also a local leader in community service and volunteerism.

**Position Description**

An employee who is a Journeyman and who performs all phases of construction, operation and maintenance of transmission and distribution overhead and underground lines in accordance with Company standards and other Company and/or governmental rules and regulations.

**Position-Related Responsibilities**

+ Guiding the work of Apprentices and Helpers working with him/her.

+ Assembly of wood pole electrical lines and components.

+ Installation of underground conduit systems.

+ Installation of URD systems.

+ Connection of all types of transformers and other equipment used on overhead and underground lines.

+ Drive and operate all equipment to accomplish daily work and, and possess a Class A CDL Operators license.

+ Perform switching and install “hold tags” on the electrical systems, as required.

+ Maintain a high level of awareness and responsibility for environmental considerations that impact them, their jobs and the Company to the level of their knowledge, training and experience.

+ Perform emergency service restoration

+ Perform assigned work in a safe and efficient manner in accordance with Company practices and procedures.

+ This position may provide services to affiliates of the Company subject to the UNS Energy Code of Conduct and the related Policies and Procedures.

**Knowledge, Skills and Abilities**

+ Completion of an accredited Lineman/Cable Apprenticeship program or equivalent

+ Must have commercial driver's license

+ High school diploma or equivalent required

+ Knowledge of Company policies and proceduresThorough understanding of utility distribution and transmission systems, both overhead and underground.

+ Knowledgeable about electric utility services, products, service requirements and construction standards.

+ Knowledgeable about codes, ordinances, franchise agreements and Blue Stake laws.

+ This employee will be qualified to climb poles and operate aerial lifts and other construction equipment, and will be expected to work on energized equipment at any voltage level in conformance with training and safe work practices.

+ Uses technical knowledge of UES’s distribution system and policies to creatively solve problems dealing with both internal and external customers.

+ Ability to lead and work on a team effectively.

+ Demonstrate leadership and planning skills.

+ Ability to communicate effectively, both orally and written.

+ Ability to combine input from a variety of sources and make sound business decisions based on this information.

+ Read blue prints, maps, drawings, and work request packages.

+ All employees are expected and required to adhere to the Company Code of Ethics and Principles of Conduct.

**Pay Rate:** $56.28

**All job offers are contingent on successful completion of a pre-employment drug screen and background check.**

California Job Applicants -click here (https://www.tep.com/california-job-applicant-and-independent-contractor-privacy-notice/) to see our Job Applicant Privacy Notice.

Experienced Electrical Apprentice or Journeyman Electrician

Travelling USA Position

Ongoing work for a dedicated customer for various US conveyor projects

Our Electricians and Apprentices are responsible for installing electrical systems in accordance with current electrical codes and customer specifications, for performing jobs safely plus efficiently, and for keeping customers and equipment running. Our Electricians promote a positive company image through service quality, professionalism, and a strong sense of urgency.

What will you do in this position?

+ Demonstrating your commitment to safety in the workplace

+ Installing conduit and wire, terminating conductors

+ Troubleshooting circuitry and replacing damaged components on industrial equipment and systems

+ Installing fixtures and devices for industrial applications and systems

+ Ordering required parts and controlling all job materials using our computer system

+ Completing work orders as per client specifications and input; reviewing the completed job with the customer, to ensure complete satisfaction

+ Maintaining a clean work area at all times

+ Proactively preparing for upcoming work

+ Interacting with various individuals at different levels within the company

Do you have the Spark? Here's what we're looking for:

+ A valid state Journeyman Electrician license is preferred

+ 5 years of relevant electrical experience, preferably in industrial, commercial and/or institutional sectors

+ Experience with conduit runs 1/2" - 2" (EMT,GRC,PVC Coated (Ocal) and S/S)

+ Man Lift Experience is preferred

+ Solid knowledge of the California Electrical Code

+ A valid state driver's license with a good driving record

+ Excellent communications skills and ability to work with co-workers and other contractors on site

+ Superior problem-solving skill

+ Attitude of completing quality work in a safe manner

+ Experience liaising with customers in a professional and effective manger

+ Computer proficiency, including MS Outlook and Excel

+ Able to work 12 hour shifts when needed and able to travel extensively throughout the country

Here are some of the perks Spark employees enjoy:

+ Diverse and exciting industrial, commercial and institutional projects and customer base

+ Growing company with consistent work

+ Continuous training and skills improvement

+ Career advancement opportunities (such as licensed Journeyman, Foreman, Project Manager)

+ Competitive wages plus incentive plan (profit sharing on top of hourly rate and overtime pay)

+ Travel opportunities

+ Overtime opportunities

+ Excellent benefit package (Medical, Dental, Vision, Extended Health, Disability)

+ 401k

+ Employee Share Ownership Program

+ Paid uniforms

+ Paid tooling

+ Great company culture!

+ ….and much more

Who is Spark Power?

• We provide end-to-end electrical contracting, operations and maintenance services, and energy sustainability solutions to the industrial, commercial, utility, and renewable asset markets.

• We have over 1400 employees across 38 offices across North America.

• We have numerous exciting projects in commercial, industrial, and institutional sectors across Canada and the US.

We are an equal-opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

NOTE: LOCAL CANDIDATES ONLY! No relocation options.

Laser Components Detector Group, Inc. in Chandler is looking for a Production Operator that will be working in our Electronics Assembly and Test department.

REQUIRED SKILLS:

Microelectronics Component Assembly skills in wire bonding, soldering, projection welding, and die attach experience for our microelectronics device manufacturing factory

Electronic device testing with wafer prober, oscilloscope, signal analyzer, multimeter, lock-in amplifier is desirable.

The individual will be part of a dynamic team assembling high performance electronics devices and components such as avalanche photodiodes (APDs) and PINs, high speed receivers, linear arrays, TEC-cooled photoconductors, and pyroelectric detectors. In a state-of-the-art production facility, our devices are processed with different materials including, silicon, InGaAs, lead salts, and pyroelectrics.

The successful candidate will be an experienced electronics manufacturing Operator capable of:

Working with very small parts under a microscope or specialized video equipment.
Must have excellent vision and good hand-eye coordination.
Able to interpret product drawings and schematics, as well as follow verbal and written instructions.
Responsible and accountable for producing high quality work to prescribed standards (military and commercial), with a focus on continuous improvement to meet customer commitments on schedule and within budget.
Capable of being trained across the entire product line, and working with Engineering on new or emerging products as well as producing first articles.
Basic Qualifications:

MUST HAVE 3 years+ of work experience within an Electronics component Manufacturing environment.
MUST HAVE 3+ years of work experience assembling and testing electronics components
Demonstrated history of successful work experience.
Proven track record of successful manufacturing assembly/test of electronics components
Excellent punctuality and attendance.
Laser Components Detector Group, Inc. has been researching, developing, and manufacturing semiconductor detectors in Phoenix since 2003. The Detector Group specializes in engineering custom developments of individual configurations, resulting in high-performance Silicon Photodiodes, InGaAs Avalanche Photodiodes (APD), pyroelectric detectors, and Lead Salt IR Detectors for use in the detection of the smallest amounts of light and radiation. We fabricate, assemble, and test most of these products in-house. Our product range extends from low-cost APDs for commercial applications to high-end components used in military applications. Our products feature in cutting edge applications such as LiDAR for autonomous vehicles, drone technology, satellite missions to name just a few. The heart of our photon-counting APD modules also originated at our facility. We also specialize in building complete receivers that are engineered to demonstrate high sensitivity, high wavelength range, and large frequency width.

What makes Laser Components Detector Group Attractive?

Generous PTO policy
Free fresh fruit in the breakroom
Regular company events/quarterly BBQ
Free gym membership
Covered parking
Team builders
Small family work environment
Casual dress code
We believe that building a diverse team at Laser Components Detector Group helps us amplify our individual talents. We are an equal opportunity employer and committed to creating an inclusive environment where good ideas are free to come from anyone. We are proud to celebrate diversity and all qualified applicants are considered for employment without regard to gender, race, sexual orientation, religion, age, disability, national origin, or any other status protected by law.

Job Type: Full-time

Pay: $18.00 - $23.00 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Health insurance
Life insurance
Paid time off
Vision insurance
Schedule:

10 hour shift
8 hour shift
Ability to Commute:

Chandler, AZ 85225 (Preferred)
Work Location: In person